Custom Construction PVB Interlayer Glass High Adhesion Raw Material Resin

All Products

PVB Laminating Film (17)

PVB Interlayer Film (17)

Polyvinyl Butyral Interlayer (17)

PVB Layer (16)

Polyvinyl Butyral Sheet (10)

Clear PVB (16)

PVB Film (16)

Automotive PVB (7)

I'm Online Chat Now

Certification

This pvb film is good quality with high purity, not only the high quality laminated glass are produced successfully, but also increased qualified rate of glass, reduced our loss. I am satisfied with their service and quality.

—— Frank

Custom Construction PVB Interlayer Glass High Adhesion Raw Material Resin

Large Image : Custom Construction PVB Interlayer Glass High Adhesion Raw Material Resin Get Best Price

Product Details:

Place of Origin:	China
Brand Name:	ZHECHUN
Model Number:	CZ01

Payment & Shipping Terms:

Minimum Order Quantity:	1 Roll
Packaging Details:	aluminum foil and wooden box
Delivery Time:	10 days after deposit
Payment Terms:	T/T, L/C
Supply Ability:	15,000,000 square meter per year

Contact Now

Detailed Product Description

Material:	Polyvinyl Butyral	Haze:	0.6%
Light Transmittance:	87%	Shringking:	8%
Roughness:	28-50 Um	Elongation At Peak:	200%
Tensile Strength:	20MPa	Use For:	Building And Automobile Glass
Available Time:	15-20 Year
High Light:	security window film , laminated glass interlayer film

high adhesion PVB interlayer for construction glass

Our company can provide pvb interlayer film with various specification. The usual ply are 0.38, 0.76, 1.14, 1.52 (we can provide film according to your requirements). The raw material we adopted are imported from Europe.

We promise to afford the best product with the lowest price

Custom Construction PVB Interlayer Glass High Adhesion Raw Material Resin 0

Product name	PVB interlayer
Raw material	The resin
Thickness	0.38mm 0.76mm 1.14mm 1.52mm (±0.02mm)
Appearance	Achromatic or light yellow clear film, smooth surface without scratch or crease
Dotted Impurities and Air Bubbles	>0.05mm²(Allowed to scatter no more than 10 places per roll) >0.55mm²(Not to exceed 6-8 places per roll; Marking marks, add an extended 1 meter film per place
Uniformity	Lateral and longitudinal evenness degree shouldn’t exceed 15μm at a distance of 25mm Lateral deviation should be less than 35μm, while longitudinal deviation should be less than 25μm
Length Tolerance(m)	+(0-2)
Width Tolerance(mm)	+(10-20)
Water Content (%)	≥0.05
Tensile Strength(Mpa)	≥20
Haze (%)	<0.7(0.38*2)
Shrinkage(60℃/15min)(%)	≤12
Elongation at break(%)	≥200